ZD500R: Calibrate from Printer's Interface

Step 1: Media Calibration

Hold the PAUSE + CANCEL buttons for 2 seconds to start the media calibration.

Step 2: RFID Calibration

2. Press the menus ‘Home’ ( ) button. Navigate to the ‘RFID’ ( ) menu button and press

 the ‘Select’ (4) — ) button.

3. Use the ‘Left’Left () and ‘Right’ ()Right navigation arrows to browse to the ‘RFID

CALIBRATE’ CALIBRATE procedure. Press the select button ( — ) below the START on the lower

 right hand of the display.

4. The printer will slowly feed a label while adjusting the location and RFID read/write

 communication settings for your chosen RFID tag/label.

The printer will feed an additional label in some cases when calibration has completed

 successfully with the display message reading: READY

5.At Removethis point, you can open the printer and roll the excess media.labels Mediaback calibrationinside. hasThen, finishedclose the printer, unpause it, and you arewill be ready to print.