Skip to main content

Printronix: Updating Firmware via Flash Drive

Requirements:

  • Flash Drive
  • Printer set up with Power

Step 1: Import the CCM File onto your Flash Drive





Step 2: Connect the Power into your Printer

Using the provided Power Cord plug in your printer but leave the switch in the power off position.


IMG_0155.jpg


Step 3: Plug the Flash Drive into your Printer

Plug the Flash Drive with your CCM Files into your Printer.

IMG_0156.jpg


Step 4: Power on and hold down the Up Arrow

While you flip the power switch on, hold down on the up arrow on the printer. Keep holding that down until you see Config Module Detected on the printer screen.

IMG_0157.jpg


Step 5: Wait for the Printer to Reboot

At this point you will have to wait for the printer to process the files and upgrade. Wait until you see the printer reboot and a screen that says Printer Config Installed.



Back to top