Impinj R660 xSpan

Update Firmware

To update the firmware on an Impinj xSpan reader, you can use either the Web UI or a USB flash drive. The Impinj Support Portal outlines both methods, including steps to download the firmware, prepare the USB drive, and initiate the upgrade. 

Method 1: Web UI

1. Connect to the reader's Web UI: Access the xSpan reader's web interface using a web browser and its IP address.
2. Log in: If prompted, enter the administrator credentials.
3. Navigate to the Firmware Upgrade section: Look for a section related to reader upgrades, firmware updates, or software updates.
4. Browse and select the firmware file: Use the browse button to locate and select the .upg firmware file you downloaded.
5. Initiate the upgrade: Click the upgrade or install button.
6. Reboot the reader: Once the firmware upgrade is complete, reboot the reader to activate the new firmware. 

Method 2: USB Flash Drive

1. 1. Prepare the USB drive:
   Format the USB drive to FAT32 and create the necessary directory structure: `impinj\revolution\upgrade\images\`.
2. 2. Download the firmware:
   Place the firmware image file (.upg) within the images folder on the USB drive.
3. 3. Connect the USB drive:
   Plug the USB drive into the xSpan reader's USB Host port while the reader is powered on.
4. 4. Initiate the upgrade:
   The reader will automatically detect the firmware and begin the upgrade process.
5. 5. Monitor the upgrade:
   The reader's power LED will flash amber during the upgrade and become solid green upon completion.
6. 6. Reboot the reader:
   Manually reboot the reader to activate the new firmware.