# Menu Bar: Available Printers: Calibrate Printer from Web

[![image.png](https://kb.simplerfid.com/uploads/images/gallery/2025-05/scaled-1680-/h2Cimage.png)](https://kb.simplerfid.com/uploads/images/gallery/2025-05/h2Cimage.png)

- Access the Available Printers icon at the top-right of the page.

![](https://s3.amazonaws.com/cdn.freshdesk.com/data/helpdesk/attachments/production/157004031150/original/UPnZdHn7hmjfeviBiExVwrOjdv8q7iLRSA.png?1742499518)

Locate the desired print station and click the Calibrate icon to the right.

![](https://s3.amazonaws.com/cdn.freshdesk.com/data/helpdesk/attachments/production/157004031164/original/wddXTBoExOgQoDpMsqBcWkP1geMNxuTUhg.png?1742499528)

Finally, click Calibrate to start the calibration process.

![](https://s3.amazonaws.com/cdn.freshdesk.com/data/helpdesk/attachments/production/157004031178/original/WRctEr7D6wxlgsuBF5lZETeQikFoF6m3-w.png?1742499545)

- Accepting this prompt will then send both the media and ribbon and RFID calibrations to the printer, which will proceed automatically with the following steps:
    - Media and Ribbon.
    - Then a pause for roughly 10 seconds.
    - And then the RF calibration, which will take longer; the labels will periodically inch out of the printer for approximately one minute. At the end of the process it will feed out 2 or 3 labels before stopping completely.
- After the calibration has completed:
    - Open the printer and roll back the labels so the blank tags may be used—precision is not necessary
    - Un-pause the printer
    - Now you are ready to print.

<p class="callout danger">If the printer continues to VOID labels, repeat the process. If the issue persists, perform a calibration directly from the printer itself.</p>