Zebra ZD621R: Setup Wireless Connection (WiFi)

This setup guide ensures your printer is properly configured for network printing with secure WiFi connectivity. 

 

 Prerequisites 

 Before starting the setup, please make sure that your station has the "Show network printers" option set in your Print Station settings. Contact your Manager if you need assistance. 

 

 Connection Setup Steps 

 1. Launch Wizards 

 On the printer home screen, tap Wizards . 

 2. Select Connection 

 Tap Connection and then Start Connection . 

 3. Configure Network Settings 

 Wi-Fi Configuration 

 

 Select Wi-Fi > Tap ✓ 

 Set IP Port to 6101 

 Set IP Alternate Port to 9100 > Tap ✓ 

 Set Wired IP Protocol to All > Tap ✓ 

 

 Wireless Network Settings 

 

 Set the country > Tap ✓ 

 Select WPA PSK > Tap ✓ 

 In Pre-shared Key, enter your WiFi password > Tap ✓ 

 Tap Set All > Tap ✓ 

 

 Network Name and Protocol 

 

 In ESSID , set your WiFi name > Tap ✓   

 

 Note: Case sensitive - must match exactly as shown in other devices' WiFi lists. Example: Wifi_Network_Name12345 

 

 Set WiFi IP Protocol to All > Tap ✓ 

 

 Bluetooth Configuration 

 

 Set Bluetooth On/Off to Off > Tap ✓ 

 Set Bluetooth Discovery to Off > Tap ✓ 

 

 Security Settings 

 

 In Friendly Name , Tap ✓ 

 In Security , set value to 3 > Tap ✓ 

 In Authentication PIN , > Tap ✓ 

 In Bluetooth Bonding , set to Off 

 

 4. Complete Setup 

 Tap End Wizard. 

 Verification 

 You should see the message: "Connection Wizard Complete" 

 After completion, observe the network indicator (right side of screen): 

 

 Will display red for approximately 1 second 

 Will then turn green (indicating successful connection) 

 Printer should appear as Online in Simple RFID Website